Replacing a Gwiss outlet is a job that requires electrical knowledge and great caution. Below are general guidelines, but it is important to note: Working with electricity can be dangerous, and it is recommended to use the help of a qualified electrician..

Main steps in replacing a Govis socket:

1. Disconnecting the power supply:
   • The most important step: Before starting work, disconnect the power supply at the main electrical panel.
   • It is recommended to use a "tester" (voltage tester) to verify that there is no electrical current in the outlet.
2. Dismantling the old socket:
   • Screwing the socket cover.
   • Unscrew the socket screws and remove it from the wall box.
   • Disconnect the electrical wires from the old outlet. (Pay attention to the location of the wires)
3. Connecting the new socket:
   • Connect the electrical wires to the new outlet according to the markings:
     • Brown wire (phase) – marked with an L.
     • Blue wire (zero) – marked N.
     • Yellow-green wire (ground) – marked with a grounding symbol.
   • Screw the new outlet into the wall box.
   • Screwing the socket cover.
4. examination:
   • After completing the work, turn the power back on and check that the outlet is working properly.

Important highlights:

• safety: Before starting work, make sure that the power supply is completely disconnected.
• adjustment: Make sure that the new outlet is suitable for the electrical voltage in your home.
• Correct connections: It is important to connect the electrical wires correctly and safely.
• Using appropriate equipment: Use appropriate tools for electrical work.
• Professional advice: If you are not confident in performing the work, it is recommended that you seek the help of a qualified electrician.

Additional tips:

• Taking a photo of the existing connections before dismantling the old outlet can make connecting the new outlet easier.
• There are different types of Guise sockets, so it is important to adapt the socket to your needs.

I hope this information is helpful, but always remember that electricity is dangerous, so if you are unsure about the installation, it is important to seek the help of a qualified electrician.