Installing a bathroom sink trap is an important step in maintaining the proper functioning of the sink and preventing unpleasant odors. Below is a detailed guide to help you install it yourself:
Tools and materials required:
- New siphon (suitable for your sink type)
- Swedish wrench (or adjustable pliers)
- bucket
- cloth
- Sealants (optional)
Deck installation steps:
- preparation:
- Place a bucket under the old deck to collect the water left in it.
- Remove the old trap: Unscrew the union nut that connects the trap to the drain and sewer pipe. You may need to use a wrench to loosen the nut.
- Clean the drain opening and sewer pipe from dirt and debris.
- Installing the new deck:
- Connect the top of the siphon to the drain opening, and tighten the connection nut.
- Connect the bottom of the siphon to the sewer pipe, and tighten the connection nut.
- Make sure all connections are tight but not too tight so as not to damage the deck.
- If necessary, sealants can be used in the various connections to prevent leaks.
- examination:
- Turn on the water flow in the sink and check for leaks from the connections.
- If there is any leakage, retighten the nuts.
- Be careful not to forget the rubber seals that come with the siphon, these are important for sealing.
Important tips:
- Choose a siphon suitable for your sink type and sewage system.
- Use quality sealants to prevent leaks.
- Tighten the connections firmly, but be careful not to overtighten them.
If you encounter any difficulty or discomfort in performing the operation, do not hesitate to contact Avni Holdings. Our company provides maintenance services to private and business customers. We will be happy to assist you with any need.
